Oscar Night Studded Cuff Designed by Ashley Bunting Crystal pyramid stones create awesome studs on this hammered sterling plated cuff.  Sterling plated chain is used to make bezels around three of the crystals.  Structured geometric crystals contrast the irregular hammered silver and the chain bezels look like circles of crocheted silver.   A quick project that makes a statement!             Materials List (1) Vintage Matte Sterling Silver Plate Hammered 1" Wide Waffle Cuff (8) Vintage Swarovski Stones Art 4858 Crystal Comet Argent Lt CAL 6mm (7") Vintage Matte Metal Sterling Silver plated oval cable chain 4x5mm

Vintage Matte Sterling Silver Plate Hammered 1" Wide Waffle Cuff sold per each Vintage Swarovski Stones Art 4858 Crystal Comet Argent Lt CAL 6mm 16pc Vintage Matte Metal Sterling Silver plated oval cable chain 3x5mm 1ft. Mini E6000 Industrial Strength Adhesive .5 fluid oz tube

Step1: Cut three pieces of chain that are 12 links in length and one piece that is 18 links in length.  Open the end link of each piece and connect it to the first link of the same piece,  making four separate cirlces of chain. 

Step 2: Apply E600 epoxy to the bottom of one of the crystal pyramids, place and press the pyramid down into one of the hammered dimples.  Repeat with the other seven pyramids.  Let stand for approximately 20 minutes (the glue will still be very wet but has begun to set.)

Step 3: Apply E600 epoxy in a circle around one of the pyramids, use an awl, nail or tooth pick for precision.  Press one of the 12 link chain pieces into the circle of epoxy.  Repeat with the other two 12 link chain pieces.  Around one of the crystal pyramids apply a second circle of expoxy and press the 18 link piece of chain.   Let the epoxy dry over night.

The End!